How the estimate works
The load in pounds per square foot is the snow depth in feet times the snow’s density, plus the ice layer times about 57 pounds per cubic foot. Densities vary widely; the options use typical values for each kind of snow. Multiply by roof area and divide by 2,000 for tons.
What it is good for
It helps explain a collapse or sagging claim in plain numbers, and it shows why a carrier’s description of “gradual deterioration” may not fit a roof that failed after a heavy, wet storm. It is not an engineering analysis. Structural claims need an engineer’s report.
Design snow loads
Design snow loads in Vermont vary by town and elevation, and many older barns and additions were built before current codes. Ask the builder, the town or an engineer for the right figure for your building.
Questions about this tool
Is my roof safe at less than 100% of design load?
Not necessarily. Rot, prior damage and drifting all reduce capacity. If a roof is sagging or creaking, get off it and call a professional.
Why does rain on snow matter so much?
Snow absorbs rain like a sponge. A rain-on-snow event can add a large load without adding much depth.
